Check out my new wall!!!
I am LOVING it!
I feel like it finished off that room and add something new to my large wall!
I love the look with the vintage windows and my White Buffet!
I been wanting to do a chevron painted wall somewhere in my house.
I have found a million different ways of making this fun pattern come to life through paint.
I have seen it painted on canvas, rugs, curtains.. and the list goes on and on.
I have also come across a million different ways to accomplish the chevron pattern.
But I have done things different, and unlike anything I have come across, not to say that it’s not out there… but in my search for the easiest way, I have not come across it!
I did not want to tape anything off and I also knew that I would be working on this on my own so I need something that would be easy for just one person to do!
I used a good old fashion overhead projector that I found on Craigslist for $25!
Here is my
EASY AND CHEAP HOW-TO paint a Chevron Wall!
First, I printed off this pattern on to clear transparency paper
2. Set up my overhead projector and adjusted it so it would be the right size of print for my wall!
I knew the projector would not cover the length of the wall, I was more concerned about it being the right height. That way I was sure it was evenly spaced out. After I was finished with half of the wall, I simply moved the projector over and made sure the zig zags lined up with each other and then finished the wall. If you notice the start off point for my first zig zag was from the top of the doorway… that way I did not have to carry the pattern into the kitchen. I only wanted it on the wall in the living room.
3. Following the image that was projected onto the wall I used a pencil to trace the zig zag pattern. I also used a framers square to make sure all the lines were straight, but anything squared off would work.
I traced, and traced, and traced…
Here is the framer’s square I used… I liked that is was sturdy!
You can hardly see it, but I traced the whole wall!
4. I used a good Purdy brand brush that is used for trim work and cut in all the lines. I did notice that the pencil marks helped me stay within the lines, places that had lighter pencil marks were a little harder.
I will not lie this did take a while, but it was nice that I did not spend hours taping off, and I knew all the lines we perfectly spaced out and everything was even.
5. After I cut all the lines, I took and paint roller and started to fill in the lines… just make sure you are painting the right sections!
After a few coats, you have an AMAZING wall that did take some time but is VERY worth it and under $25 dollars!
I bought a can of paint for this project and I used only about half of a can.
No other supplies besides the overhead projector, which you could borrow or rent.
I know there are some schools, churches, of even libraries that you can borrow from.
Here is my Before Picture!
And My AFTER picture!
How did you think my wall turned out?
Also, what did you think about using the overhead projector?
Can you imagine the possibilities with that little machine!
I would really like to know what you think, and if you have any questions,
either leave me a comment or send me an email.
Happy Labor Day!